To Next PageTo Next PageWhat to do if the Franke FSM 97 P display shows the letter “F” followed by a number?
If the display of your Franke Oven shows the letter “F” followed by a number, this indicates a software problem. Contact your nearest After-sales Service Centre and state the letter or number that follows the letter “F”.
Identifies and labels the main parts of the oven shown in a diagram.
How to select oven functions and turn the oven on/off.
Controls the internal oven light.
For setting cooking time, delayed start, and timer.
Shows time and cooking status.
Uses thermostat knob and adjustment buttons for temperature.
Describes available accessories and how to use them.
Instructions for fitting and removing sliding runners and shelf guides.
Explains the Conventional and Forced Air cooking functions.
For cooking large meat joints.
Details Pizza, Grill, and Turbo Grill functions.
Covers Rising, Eco Forced Air, Bread Auto, and Dessert Auto.
Explains the oven's self-cleaning function.
Steps to set the initial time after first use.
How to configure the oven's power level.
Instructions for the initial heat-up to remove manufacturing odours.
How to choose and start cooking functions.
Understanding preheating and residual heat signals.
Setting cooking duration, end time, or delayed start.
How to interpret and use the cooking table for recipes.
Tips for cooking multiple dishes and using the Bread Auto function.
Safety measures and preparation for the self-cleaning cycle.
General cleaning advice and methods for exterior/interior surfaces.
Procedures for replacing the lamp and removing/cleaning the door.
How to clean oven accessories.
Solutions for the oven not working or displaying error 'F'.
How to get help from the Franke Technical Service Centre.
General