Franke F1 User Manual

For correct operation & installation it is essential to observe these instructions.
User Guide
Inline Water Filter System
F1 HIGH FLOW WATER FILTER
MAKE IT WONDERFUL

Franke F1 Specifications

General

Filtration Technology	Reverse Osmosis
Stages of Filtration	5
Filter Life	6-12 months (depending on usage)
Water Production Rate	50-75 gallons per day
Storage Tank Capacity	3.2 gallons
Dimensions	16.5 x 5.5 x 17.5 inches
Weight	15.4 lbs
Operating Pressure	40-80 psi
Operating Temperature	40-100°F
Included Filters	Sediment, Carbon, RO Membrane, Post Carbon

Summary

Franke Customer Service

Customer Support Contact

Provides contact phone numbers for customer service in Australia and New Zealand.

Operation

System Operation Guidelines

Details operational use, flushing after non-use, and water source compatibility.

Filter Installation Guide

Installation Requirements

Lists necessary prerequisites for installing the water filter system, including pressure and temperature.

Installation Procedure

Step-by-step instructions for installing the water filter system correctly.

Filter Cartridge Replacement

Cartridge Replacement Procedure

Step-by-step guide on how to replace the filter cartridge, including frequency.

Water Filter Performance Data

Performance Data Summary

Details the system's performance in reducing contaminants and meeting standards.

Product Warranty Information

Warranty Australia

Details warranty terms and conditions specific to Australia.

Warranty New Zealand

Details warranty terms and conditions specific to New Zealand.