3
About this manual
This manual contains important
information on the safe and proper
installation and commissioning of the
product.
FRANKE reserves the right to make
modications to the product without
prior notice. All information correct at
time of issuance.
► Carefully read the user manual
before using the device.
► Keep the user manual.
► Use the device described in this
user manual only according to the
intended use.
Symbol Meaning
Warning symbol. Warning
against risks of injury.
Action step. Species an
action to be done.
Safety information
The use of a Franke Pro M /
Pro M Connect lter is mandatory
to protect the product against
limescale deposits.
After storage at 0°C, the lter
must rst be stored for 24 hours
at room temperature before it is
installed.
Only cold, potable-quality
water may be used to supply the
system.
All components must be
stored dry within a temperature
limit of -15°C to 45°C (5°F to
113°F).
The system must be sited in a
frost-proof place and be
protected from direct sunlight.
The system must not come in
contact with chemicals, solvents
or other vapours.
Before commissioning the
lter system, the appliance must
be free of limescale.
The lter cartridge must not
be opened or damaged.
Do not use with water that is
microbiologically unsafe or of
unknown quality without
adequate disinfection before or
after the system.
After a longer downtime or
maintenance work rinse the
system thoroughly.
EN
To Next Page
Loading...
