Select
product
or
Starting up
…
1
Your coffeemachine in an overview
Coffee bean container/grinding unit
Das System
Operating unit
• Display
• Choice of product or function buttons
see customer menu [Page 8-10]
Grounds container flap
Drip grid
Installation/starting
–> is carried out by specialists from
your supplier. The products and the
basic adjustments are programmed
following your requirements. You can
make changes yourself through the
«customer menu» function.
[See 8-10].
Machine is plugged in but
switched OFF: working condition
«Energy-Save-Mode»
Stand by
Fill water tank!
Beans/milk filled up!
Operating temperature achieved
Switch on/warming up/ rinsing
Use
automatic timer
[Seite 9]
Unit
ready to use!
Operating
temperature achieved
Safety
We congratulate you to the purchase of a Franke coffee machine. You have decided for a high quality
coffee making machine, developed and manufactered following state of the art technologies. The
Franke Kaffeemaschinen AG manufactures its machines according to the ISO 9001 and ISO 14001
standards. Its certification is under permanent control by external agencies.
Flair
Steam nozzle
Hot water outlet
Coffee/milk outlet
Drip tray
Access for cleaning tablet
Please
wait
Select
product
first starting up
Power supply cord…
Fill water tank!
Beans/milk filled up!
measure water hardness using test strips (pages 9, 5, 2)!
Switch on Date / time
PROG.
confirm
2.1 Date time5.1 Language
adjust
Choose language
Main switch on
rear panel
plug in
Rinse unit
Rinse
unit
Water tank
• ristretto
• espresso
• coffee
• white coffee
• cappuccino
• macchiato
• hot water
The products
MILK COFFEE
WATER
STEAM
• steam• hot milk
• froth
Carefully read this instruction, especially the safety instructions before initial
operation. For damages which occur out of non compliance with this
instruction, no liability exists. Keep this instruction manual handy where
also other users can readily refer to it!
If the coffee machine is taken out of use or is no longer used, it shall be
disconnected from the power and water. In any other case local regulations
are binding.
Failure to observe the instructions in this
manual, including the safety instructions,
can lead to hazardous situations due to
the presence of steam, hot water,
electricity etc.
To Next Page
Loading...
Need help?
General
