Franke FM800 - Syrups (Optional)

4
4
4
44
4
4
01
i
02
03
04
05
030201
0201
4
03 04
Filling and emptying
Page 23
Type 3Type 3
Starting...Starting...
Type 2Type 2
Clean Flavour StationClean Flavour StationClean Flavour Station
Clean Coff ee MachineClean Coff ee MachineClean Coff ee Machine
Starting...Starting...
Starting...Starting...
Type 1Type 1
Wipe ProtectionWipe ProtectionWipe Protection
Prepare syrup systemPrepare syrup systemPrepare syr up system
Prepare milk systemPrepare milk systemPrepare milk system
Rinse Coff ee MachineRinse Coff ee MachineRinse Coff ee Machine
ERROR LOG fi lesERROR LOG fi lesERROR LOG fi les
Cleaning and maintenance
Individualization and data transfer
My Settings
Preparing the syrup system
Emptying the Flavour Station
When you assign a new syrup type to a pump, do not forget to update
the list with the new assignment in the "My settings" menu under
"1.11 Flavour".
Switch on the Flavour Station.
Close the Flavour Station.
Place syrups in the Flavour Sta-
tion and insert all hoses.
Press the release button and
open the Flavour Station.
Filling the Flavour Station
Syrups (optional)
Switch to Maintenance level.
Press the release button and
open the Flavour Station.
Select Cleaning and mainte-
nance.
Remove the hose from the bot-
tle and remove the bottle.
Select Prepare syrup system.
Clean the syrup system if
necessary.
Syrup type is being prepared.
Observe the instructions on the
operating interface.
When used with several types,
repeat steps 4 and 5.
Select and confi rm Starting.
Switch the Flavour Station off if
no longer required.
Close the Flavour Station.