Franke FSL 20 MW BK - Operation; Clock Setting; Microwave Cooking

OPERATION
1) Press " " once, the screen display "P100".
2) Turn " " to adjust the hour figures, the input time should be within 0--23.
3) Press " ", the minute figures will flash.
3) Press " " to confirm, and the screen displays "P 80".
4) Turn " " to adjust the cooking time until the oven displays "20:00".
5) Press " " to start cooking .
1. Clock Setting
When the microwave oven is electrified, the screen will display "0:00", buzzer will ring once.
1) Press " " twice to select clock function, the hour figures will flash.
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press " " to finish clock setting. ":" will flash, and the time will light.
2) Press " " once again or turn " " to choose 80%
microwave power.
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press " ", the oven
will go back to the previous status automatically.
2. Microwave Cooking
Press " " once, the screen will display "P100". Press
" " repe
"
confirm, and turn
" " to set cooking time from
0:05 to 95:00. Press
" "
again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
Start/+30Sec./Confirm
Kitchen Timer/Clock
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Stop/Clear
Start/+30Sec./Confirm
" to choose the power you want, and
"P100", "P 80", "P 50", "P 30
for
each added press. Then
press " " to
s
, "P10", "G" , "C-1" or "C-2" will display
Kitchen Timer/Clock
Kitchen Timer/Clock
Micro./Grill/Combi.
Micro./Grill/Combi.
Micro./Grill/Combi.
Micro./Grill/Combi.
atedly or turn "
EN-18