4
Location
Requirements
I M
PO R
T
AN T:
For best performance, allow a 2" (5 cm) space around the side and the top. Do not put any objects on top of the chiller that
co
u
ld
obstruct the fan.
3
1. Chiller
uni
t
2. Blue tubing
i
ncluded
4
with chiller
2
3. Faucet is
r
equired
(sold
separately)
4. Cold water supply
lin
e
9
5. White tubing
i
ncluded
with
c
h
ille
r
5
6.
Filtration
(sold
separately)
7
10
8
14.75”
5
(37.46
cm)
7. Water supply fitting
(sold
separately)
8. Filter
inlet
9. Filter
outle
t
6
8.72"
10.
10
. Quick
connect fitting
(22.14 cm) (26.16 cm)
included with chiller
Electrical
Requirements
A 120-volt, 60-Hz, 15- or 20-amp,
grounded
electrical supply is
required.
This drinking water cooler is intended to be connected to a ground fault
circuit interrupting (GFCI) device to mee
t UL requirements.
It is
recommended
that a separate circuit serving only your chiller
unit
be provided. Use an outlet that cannot be turned on/off by a
switch.
Recommended
Ground
Method
T
he
chiller must be
grounded.
This
appliance is
equipped
with a
power
supply cord with a 3 prong ground plug. To minimize possible
shock
hazard, the cord must be plugged into a mating, 3 prong,
g
r
ound-type
outlet,
grounded
in accordance with all national and local codes
and
ordinances.
If
a mating outlet is not available, it is the
personal
responsibility and obligation of the customer to have a
properly
grounded,
3 prong outlet installed by a qualified
electrician.
To Next Page
Loading...
