Need help?Do you have a question about the Franke CT-200 and is the answer not in the manual?
Explains the safety alert symbol, highlighting potential hazards that can cause injury or death.
Defines "DANGER" and "WARNING" terms used in safety messages, specifying potential consequences.
Provides contact details for customer assistance, service requests, and website information.
Lists key technical data for the CT-200 chiller, including capacity, voltage, and pressure ratings.
Itemizes all parts and accessories provided in the product packaging for installation.
Advises on professional installation, local code adherence, and avoiding sealing compounds to maintain warranty.
Mentions the need for a dispensing faucet and the recommendation for a pressure safety valve.
Specifies requirements for chiller placement, including necessary clearance for ventilation and access.
Details the required electrical specifications and proper grounding methods for safe operation.
Outlines the minimum and maximum water pressure requirements for the chiller's water supply.
Provides step-by-step instructions and diagrams for connecting tubing using push-fit fittings.
Presents a diagram showing the complete installation of the chiller with a specific faucet type.
Lists and identifies each numbered component shown in the system installation diagram.
Instructions for unpacking the chiller, allowing it to rest, and preparing the water supply.
Details how to connect the water supply tubing to the chiller's inlet port using appropriate fittings.
Guides the connection of output tubing from the chiller to the dispensing faucet or other components.
Provides detailed instructions for connecting the chiller to different models of dispensing faucets.
Explains the installation process for the chiller when a filtration system is not used.
Details the installation steps for connecting the chiller to a filtration system and water supply.
Instructions for turning on the water supply, flushing the system, and checking for leaks.
Explains how to adjust the chiller's temperature control dial and shut down the unit.
Steps for safely disconnecting, draining, and storing the chiller unit.
Guidelines for re-installing and preparing the chiller for operation after storage.
Lists typical issues such as no cold water or poor taste, with corresponding troubleshooting steps.
Outlines the coverage period, conditions, and process for warranty claims on the chiller.
Lists conditions and actions that will void the warranty, such as misuse or alteration.
To Next Page
General