16
ELECTRIC INDUCTION COOKING (FIXG903B1, FIXG905B1)
PROCEDURE TO START PARBOILING - INDUCTION
_______________________________________________________________________________________________________________________
Automatic parboiling is activated by turning the knob anti clockwise briefly, the `A` symbol will appear. The required on-boiling stage is selected by
turning knob clockwise which is shown on the display. The `A` symbol appears after 1 second upon releasing the knob.
The on-boiling stage can be adjusted within 15 seconds after activation without cutting off the parboiling boost. If another selection is made after 15
seconds the knob can be used to select an even lower on-boiling stage which however cuts off the Automatic parboiling function at the same time.
Turning the knob higher on boiling stage (even after the above 15 seconds) can be selected. This leads to the parboiling time being automatically
brought in line with the currently selected on-boiling stage.
Once the parboiling has ended only the selected cooking stage is indicated on the display.
BOOSTER FUNCTIONS - INDUCTION
_______________________________________________________________________________________________________________________
The `Booster` function for the burner is enabled by turning the knob clockwise. When this function is enabled, the display shows the letter `P`.
By means of this function the cooking zone is enabled to receive power > 100%.
The Boosting time is limited to 10 minutes to protect cooking utensils. After the booster is switched off automatically, the cooking zone continues
operation on nominal power. The booster can be reactivated provided that the temperature sensors in the electronics and if the coils have the
capacity.
When a pan is removed from the cooking zone during boosting, the no pan symbol is displayed and boosting time continues to count down. When a
pan is replaced within the boost time it will reactivate.
If the booster temperature limit of the electronics or coil on the boosted cooking zone is exceeded, the booster is cut off automatically and reset to
nominal power. While one of the two temperature limits remains exceeded the booster cannot be activated. In this case the booster is indicated when
the knob is turned clockwise which is followed by an automatic reduction on the display.
CHILD LOCK – INDUCTION
_______________________________________________________________________________________________________________________
Child lock function on FIXG905B1 is activated by turning control knob anti-clockwise until an “L” symbol appears. Repeat this process to unlock.
This process is the same for the FIXG903B2 using the far right control knob.
PAN DETECTION - INDUCTION
_______________________________________________________________________________________________________________________
This feature is able to recognise the presence of a pan that according to the scale of the EN standards is one size smaller than the nominal diameter
of the burner. If no pan is detected or if an unsuitable pan is detected the no pan symbol is displayed. If the no pan symbol appears when a pan is
actually on the burner this generally means that the size or shape of the pan concerned is unsuitable. In this case check whether the type of pan is
suitable for induction cooking.
To Next Page
Loading...
Need help?
General
