7
Ice Maker Installation00000000
Unpacking
This unit is an ice maker only. It requires a separate ice storage bin.
Remove packaging materials
IMPORTANT: Do not remove any permanent instruction labels or the data labels on your ice
maker.
Remove tape and glue from your ice maker before using:
· To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue
residue can also be easily removed by rubbing a small amount of liquid dish soap over the
adhesive with your fingers. Wipe with warm water and dry with a soft cloth.
· Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to
remove tape or glue. These products can damage the surface of your ice maker.
Location Requirements
· This ice maker should be installed by qualified personnel.
Installation clearance
TOP VIEW
To Next Page
Loading...
