Franklin Explorer EST-7014 - Page 75

75
• To start a slideshow from a specic image
le, repeat this step as you are viewing
the specic image le.
4. During the slideshow, hold FN and
press M, and then press or to select
Slide Setting from the pop-up menu for
the following slideshow settings.
Play
Mode
To show image les either
in their sequential order or
randomly. Press or to
select an option.
Interval Press or to set the display
time of each image in the
slideshow. When 0s is set,
slideshow will only proceed
until you hold FN and press M,
and then select Previous or
Next from the pop-up menu.
Loop To replay or not the slideshow
after all image les are shown.
Press or to select an
option.
Note: Press or to move between the
above slide setting menus.
5. Press ESC to exit the slideshow.