FranklinWH System User Manual
10
aGate Built-in Optional Parts
Component Description SKU
Smart Circuits Module
The FranklinWH system can use the
Smart Circuits Module to provide
homeowners with direct control of three
unique circuits. The Smart Circuits
Module is an optional component of the
aGate.
ACCY-SCV2-US
Generator Module
The FranklinWH system can connect to a
household backup power generator. This
connection is an optional component of
the aGate.
When the FranklinWH system is working
off-grid, the generator may serve as a
backup power source for the household
load and to recharge the aPower. The
combination of a generator and the
FranklinWH system can provide
uninterrupted power to homes for a long
time period, lowering the fuel
consumption over time of the generator.
ACCY-GENV2-US
Main Load Relay
When the optional Main Load Relay is
installed, the system will automatically
disconnect load-side electrical
appliances, so that the PV will only
charge the aPower battery, significantly
improving black start success rate.
Without the module, you will need to
manually disconnect electrical
appliances.
ACCY- MRV2 – US
Backup Expansion Lug
Kit
The aGate has one (1) set of backup load
terminals reserved to meet the needs of
most households. When there are many
household backup loads, they are
scattered, or when the number of
connected aPowers are greater than the
capacity of the aPower interface, it is
necessary to group the loads or connect
the excess aPowers to the backup port.
The FranklinWH system provides an
optional Backup Expansion Lugs to meet
your needs.
ACCY- BLV2 – US
To Next Page
Loading...