FranklinWH System User Manual
22
Shutdown Steps
1. Turn off the grid breaker if connected to the grid.
2. Press the aPower switch on all aPower batteries to the OFF position (extended,
flush with the case), and each LED strip will go out.
3. Turn off the aPower breaker.
4. Turn off the PV breaker.
5. Turn off the generator breaker if connected to a generator.
6. Turn off the Smart Circuits and backup breakers if applicable.
7. Turn off the aGate power switch inside the aGate.
NOTE
If the family plans to be gone for a long time, please keep the grid or PV
power, aPower breaker, aPower switch and aGate power switch on.
Otherwise, the energy stored in aPower will eventually be depleted,
resulting in a startup failure.
To Next Page
Loading...