Frascold RTSL-30-120 User Manual

v3
Semi-hermetic Screw Compressors
Installation and start-up instructions
Index
1. Information
2. Unpacking and handling
3. Safety
4. Application ranges / Lubricants
5. Installation
6. Electrical connections
7. Commissioning
8. Operation / Maintenance
9. De-commissioning
Compresores de tornillo semiherméticos
Instrucciones para la instalación y la puesta en marcha
Índice
1. Información
2. Desembalaje y desplazamiento
3. Criterios de seguridad
4. Límites de aplicación / Lubricantes
5. Instalación
6. Conecciónes eléctricas
7. Puesta en marcha
8. Funcionamiento / Mantenimiento
9. Puesta fuera de servicio
FTEC004_07_EE

Frascold RTSL-30-120 Specifications

General

Type	Semi-hermetic
Refrigerant	R404A/R507
Cooling Capacity	Information varies based on refrigerant and operating conditions. Consult manufacturer's documentation for specific values.
Power Supply	Information varies based on motor configuration. Consult manufacturer's documentation for specific values.
Sound Pressure Level	Information varies based on operating conditions. Consult manufacturer's documentation for specific values.
Operating Temperature	Information varies based on refrigerant and operating conditions. Consult manufacturer's documentation for specific values.

Summary

Information

Identification of Safety Instructions

Identifies danger, warning, caution, and attention symbols used in the manual.

Unpacking and Handling

Handling Precautions

Covers safe practices for unpacking and moving compressors, including warnings.

Safety

General Safety Guidelines

Outlines general safety regulations and compliance for compressor installation and operation.

Specific Hazard Warnings

Details specific hazards like burns, irreparable damage, and electrical shock.

Residual Hazards and Personnel

Addresses unavoidable residual risks and the need for qualified personnel.

Installation

Mounting and Vibration Dampening

Details requirements for solid fixing, vibration absorbers, and torque specifications.

Piping Requirements

Oil Management System

Electrical Connection

Wiring Methods and Safety

Details wiring for Part Winding Start (PWS) and Direct On Line (DOL) with high voltage warnings.

Protection Sizing and Cables

Protection Devices

Commissioning

Pressure Testing and Leak Detection

Covers factory tests, required pressure tests, and leak detection procedures.

Oil Charging and Evacuation

Refrigerant Charging and Final Checks

Details refrigerant charging, final checks, and rotation direction verification.