FRC TACH P3 TPA600 - General Description of Components and Controls; System Components; Controls and Indicators Explained

TPA600 Rev170623
4
GENERAL DESCRIPTION
The Engine Monitoring Display receives all input from the J1939 CAN bus.
Components
The Engine Monitoring Display consist of the following components:
Display Module
Buzzer
Controls and Indicators
All controls and indicators are located on the front of the control module. Refer
top Operation and Programming Sections for more information.
RPM Display
Shows the current engine RPM in bright red digits. It also shows error codes, stored
data, and program features.
OIL PRESSURE Display
Shows the engine oil pressure in bright red 0.4" digits.
ENGINE TEMP Display
Shows engine coolant temperature in bright red 0.4" digits. (Shows transmission
temperature when selected.)
VOLTAGE Display
Shows the battery voltage in bright red 0.4" digits.
When in the information scroll mode this display shows system and options information.
MENU Button
The MENU button is used to show the transmission temperature if it is available.
It is also used to access program features. (Transmission temperature is shown in the
ENGINE TEMP display.)
SILENCE Button
The SILENCE button is to de-activate the audible warning alarm. It is also used
to access program features.