FRC TACH P3 TPA600 - Operating the Engine Monitoring Display; Alarm System Operation; Viewing Transmission Temperature; Accessing Engine Hours Data

TPA600 Rev170623
8
OPERATION
The Engine Monitoring Display shows crucial engine information to the pump operator.
Visual Alarm
When a monitored input exceeds the set warning level the display ashes. This
visual alarm cannot be reset or cancelled manually. The alarm stops automatically
when the monitored input is at a normal level.
Audible Alarm
The audible alarm is a clear distinctive warning that sounds when a monitored
input exceeds the set warning level.
Silencing Audible Alarm
All audible alarms can be cancelled by pressing the SILENCE button. Pressing
the SILENCE button does not change the visual warning.
Transmission Temperature
When the transmission temperature is available on the J1939 CAN bus and the
program code P07 is enabled, press the MENU button to show it on the ENGINE
TEMP display.
Engine Hours
To access the Engine Hours feature, press the MENU button again and Eng Hr is
shown on the display. The actual number of hours will be shown on the RPM display.