FRC Turbofoam TFC200 - Page 60

TFC100 Rev180215
60
Figure W1. System Cables
FRC Datalink
Y-Cables (x
s
3)
FRC Datalink
Y-Cables (x
s
2)
RPM
Sensor
Cable
RPM
Sensor
Cable
Foam Pump
Control Cable
Foam Pump
Control Cable
Control
Module
Control
Module
TankVision Pro
Displays
TankVision Pro
Displays
Pump
Motor
Cables
Pump
Motor
Cables
Motor DC Supply Power Input Wires
are supplied by the installer. Refer
to Foam Pump Control Wiring for
recommended wire sizes.
Motor DC Supply Power Input Wires
are supplied by the installer. Refer
to Foam Pump Control Wiring for
recommended wire sizes.
Flow Sensor
Cable
Flow Sensor
Cable
DC
Volts
DC
Volts
DC
Volts
DC
Volts
DC
Volts
TFC200 Two Tank with
Manual ABF Selector
TFC400 Two Tank with
Electric ABF Selector
Electric ABF
Selector Cable
Manual ABF
Selector Cable
Tank Float Switch: If tank oat switches are used the FRC datalink y-cables for the TankVision Pro are not
needed. The tank oat switches are wired to the control module connector tank empty inputs.
Remote ON/OFF Switch: Wire to the control module remote switch inputs.
Flush/Prime Switch: Wire to the control module ush/prime switch inputs.
+ DC Aux Out (3 A)
+ DC Aux Out (3 A)