32
7. STOP CHARGING
If the charging process is completed, the LED on the device turns BLUE, and
the connector can be removed from the electric vehicle as explained in 7.1.
If the charging process is not completed, it must rst be stopped.
The interruption can be done in two dierent ways:
Directly through electric vehicle dedicated control (see the vehicle instruction
manual for more details)
Using Free2Charge app.
Once the process is stopped, refer to the next chapter.
Please note that, once the charging process is stopped, the connector
must be extracted from the vehicle before the charging process can
be restarted.
Avoid pulling the cable from the vehicle inlet if the charging process
is not completed.
To Next Page
Loading...
