Freedom Scientific RUBY+ - Changing Color Modes; Selecting Color Display Modes; Freezing an Image; Capturing a Still Image

14
Changing Color Modes
1. Press the Color Mode button to change the current color
combination on the LCD screen.
2. Continue pressing the button to cycle through Full Color, Black on
White (high-contrast positive), White on Black (high-contrast negative),
Yellow on Blue, and Yellow on Black color combinations.
Freezing an Image
1. Press the Freeze Frame button to freeze the image.
2. If you like, press the Plus button to change magnification.
3. Press the Freeze Frame button again to turn off Freeze Frame
mode.