Why does my FreeFlight Transmitter show a GPS Fault?
- RRebecca RogersAug 17, 2025
The GPS Fault in the FreeFlight Transmitter indicates that the GPS has reported an unavailable position or a fault.
Why does my FreeFlight Transmitter show a GPS Fault?
The GPS Fault in the FreeFlight Transmitter indicates that the GPS has reported an unavailable position or a fault.
What does PSU Fail mean on a FreeFlight Transmitter?
A PSU Fail in the FreeFlight Transmitter indicates an internal DC Power Supply failure.
What causes Bot Ant Fault on a FreeFlight Transmitter?
The Bot Ant Fault on the FreeFlight Transmitter indicates that the bottom antenna is disconnected.
Why is my FreeFlight Transmitter showing 'Remote Hot'?
If your FreeFlight Transmitter displays 'Remote Hot', it means the FDL-978 ADS-B equipment internal temperature is too high.
What does ADC Fault mean on FreeFlight Transmitter?
An ADC Fault in the FreeFlight Transmitter suggests an ADC or Altitude encoder fault or that it is not responding.
What does TX Fault mean on FreeFlight Transmitter?
A TX Fault on a FreeFlight Transmitter indicates a generic Transceiver Fault related to POST, transmit, address, broadcast, or nominal rate failure.
Why is the Tx Power Low on my FreeFlight Transmitter?
The Tx Power Low error in the FreeFlight Transmitter indicates that the transceiver power is too low.
What causes Tx PSU High error on FreeFlight Transmitter?
The Tx PSU High error on the FreeFlight Transmitter means the transceiver power supply voltage is too high.
What does Tx PSU Low mean on FreeFlight Transmitter?
The Tx PSU Low error on the FreeFlight Transmitter indicates that the transceiver power supply voltage is too low.
What is a Squitter Fail on a FreeFlight Transmitter?
A Squitter Fail in the FreeFlight Transmitter means there is a transceiver modulation fault.
Provides a brief overview of the FDL-978 ADS-B system and its purpose in aviation.
Details the FDL-978 ADS-B equipment, its interface with the TC978 controller, and manual contents.
Explains the TC978 controller's display elements, including wave symbols for ADS-B reception/transmission.
Details the operation of the Mode Selection knob for controlling the FDL-978 ADS-B equipment's power and modes.
Guides users on using the CODE knob to set Squawk Codes and Call Sign/Flight ID.
Describes the effect of external control inputs on the TC978 display, including reverse video.
Covers the functionality of the IDT, FN, VFR, and ENT buttons on the TC978 controller.
Explains how the TC978 displays warnings and the significance of the MSG icon.
Describes the TC978 display when communication is lost with the FDL-978 ADS-B equipment.
Details how the TC978 indicates catastrophic internal failures of the FDL-978 ADS-B equipment.
Explains the Anonymous Mode feature for broadcasting random ICAO addresses and its operational constraints.
Describes the ADS-B annunciator used to signal device or position source failures when no TC978 is present.
| Brand | FreeFlight |
|---|---|
| Model | FDL-978 |
| Category | Transceiver |
| Language | English |
Loading...