86| AIRCRAFT FLIGHT MANUAL
BEFORE TAKEOFF
1. Prop Area CLEAR
2. Mode Switch MANUAL
3. Home Switch CENTER POSITION
4. Radio Controller VERIFY CORRECT MODEL
5. Telemetry (if equipped) CHECK OPERATION
6. ALTA 8 ARM
7. Status Light VERIFY OFF
8. Orientation Lights VERIFY USER-DEFINED COLOR
9. Motors START and VERIFY OPERATION
10. Flight Controls VERIFY CORRECT
11. Throttle ADVANCE
12. Disarm Safety ON
AMPLIFICATION
Prior to start, check the surrounding area to ensure people and objects are clear of
ALTA 8 and its props. Also ensure that there are no people or objects between the
ALTA 8’s takeoff location and its intended flight path.
WARNING
ALTA 8’s props spin at a high RPM, and the ends of the blades
move at high speeds. ALTA 8’s props can cause severe injury
or death or cause damage to objects while they are rotating.
Always ensure the area surrounding the props and ALTA 8 is
clear of people or objects prior to starting the ALTA 8’s motors.
ALTA 8 can only be armed for flight when it is in the Manual Mode, and the Home
Switch is in the middle position. To arm, hold full low throttle and full left yaw.
WARNING
Do not approach ALTA 8 while it is armed.
To start the motors, hold full low throttle and full right yaw. Ensure that all the
motors are spinning. Keep the throttle in the lowest position and move the pitch, roll
To Next Page
Loading...
