2. The Wrong Starting Operation (refer to picture 6 & 7)
Freego will consider the current pedal’s position as its original position
setting, so it is hard for driver to stand on Freego if the pedal is not vertical.
The original position can be reset after repeated power on and off. For
example, you can turn off Freego and put the pedal vertical, then turn it on
and test it, try this adjustment until it is in best state.
Picture 6 Picture 7
3. Correct Example As Follows (refer to picture 8)
(Must keep Freego before powering on)
Picture 8
To Next Page
Loading...
