Do you have a question about the Freewing Twin B-2 Spirit Bomber and is the answer not in the manual?
Attach the main wing to the fuselage using screws.
Glue the Beaver Tail onto the rear fuselage.
Score and glue the vertical stabilizer onto the fuselage tail.
Secure the flight battery in the designated compartment.
Details on pushrod lengths and mounting holes for control surfaces.
Secure clevis with silicone ring for reinforcement.
Adjust CG by moving the battery for optimal stability.
Verify control surfaces move correctly with transmitter inputs.
Recommended control surface throws for initial flights.
Crucial operational advice for safe flight and setup.
Defines servo direction and lists compatible servos.
Technical data and performance specifications for the motor.
Set up integrated control box for proper flight modes.
Check control surface centering and function.
Adjust control throws for optimal flight response.
Operational advice for flight, including trim.
Explains servo direction and provides a compatibility list.
Technical specifications of the motor.
Guidance on control box setup for flight modes.









