freightliner EconicSD - Page 49

X
Releaselever =.
X
To adjust theseatcushion angle: pull
lever ; upwards and hold it.
X
Apply force to/relieveload on theseat
cushion or backrest in order to moveitinto
thedesired position.
X
Releaselever ;.
X
To adjust theseatheight: pull lever B up
or push it down onelevel.
The seat is raised or lowered by onelevel.
X
To adjust thedamper: set thedamper
usinglever A.
X
To use theEASY-ENTRY/EXIT feature:
press lever ? downwards.
The seat is lowered completely.
X
Pull lever ? upwards.
The seat returnstothe previously set
height.
i
You can adjust thebackrest contour (lum-
bar support)tosupport your spine.
X
To adjust thebackrestcontour: press the
upper or lower section of switch E.
The lower seat backrest contour is
increased or decreased.
X
Press theupper or lower section of switch
C.
The upper seat backrest contour is
increased or decreased.
Static co-driver's seat
Example: staticseat
The staticseat cannotbeadjusted.
Adjusting themultifunction steering
wheel
G
WARNING
You could lose control of your vehicleifyou
do thefollowingwhile driving:
R
adjust thedriver'sseat,steering wheelor
mirrors
R
fastenthe seat belt
There is ariskofanaccident.
Adjustthe driver'sseat,steering wheelor
mirrorsand fastenyour seat belt before
starting theengine.
G
WARNING
If thesteering wheelisunlockedwhile the
vehicleisinmotion,itcould changeposition
unexpectedly. This could causeyou to lose
control of thevehicle. There is ariskofan
accident.
Beforestarting off,makesurethe steering
wheelislocked. Never unlockthe steering
wheelwhile thevehicleisinmotion.
If sufficientsupplypressureisavailable, you
can adjust thesteering wheel.
X
Stop thevehicle.
X
Apply theparking brake.
X
To adjust: press lower section ; of the
button.
The steering column is unlocked.
X
Adjustthe multifunction steering wheel
height and angle.
X
Press upper section : of thebutton.
The steering column is locked.
Adjusting themultifunction steering wheel
47
Driver's workstation
Z