To Next PageTo Next Page
Need help?Do you have a question about the freightliner 108SD 2021 and is the answer not in the manual?
General| Brand | freightliner |
|---|---|
| Model | 108SD 2021 |
| Category | Trucks |
| Language | English |
Determine correct maintenance intervals based on service conditions and schedules.
Lists all maintenance operations to be performed at the initial maintenance interval.
Details maintenance operations required at the M1 maintenance interval.
Lists all maintenance operations to be performed at the M2 maintenance interval.
Details maintenance operations required at the M3 maintenance interval.
Lists all maintenance operations to be performed at the M4 maintenance interval.
Details maintenance operations required at the M5 maintenance interval.
Lists safety precautions applicable to all procedures within the Engine group.
Lists safety precautions applicable to all procedures within the Air Intake group.
Provides instructions for inspecting and replacing the air cleaner element.
Lists safety precautions applicable to all procedures within the Air Compressor group.
Details the steps for inspecting the air compressor system components.
Lists safety precautions applicable to all procedures within the Alternators and Starters group.
Outlines the procedure for checking electrical connections of alternator, battery, and starter.
Lists safety precautions applicable to all procedures within the Engine Cooling/Radiator group.
Provides steps for flushing the cooling system and changing the coolant.
Lists safety precautions applicable to all procedures within the Clutch group.
Procedure for adjusting manually adjusted clutches.
Lists safety precautions applicable to all procedures within the Transmission group.
Procedure for checking transmission fluid levels for Eaton Fuller and Allison.
Steps for changing fluid and cleaning magnetic plugs in Eaton Fuller transmissions.
Procedure for changing fluid and filter in Allison transmissions.
Lists safety precautions applicable to all procedures within the Frame and Frame Components group.
Checks torque of frame fasteners to ensure proper seating and prevent damage.
Inspects fifth wheel assembly for cracks, wear, and proper function.
Lists safety precautions applicable to all procedures within the Suspension group.
Instructions for inspecting suspension components for damage or wear.
Procedure for checking and tightening U-bolt torque.
Lists safety precautions applicable to all procedures within the Front Axle group.
Instructions for lubricating knuckle pin assemblies on various axle types.
Procedures for checking axle alignment and parallelism.
Inspects front axle wheel end components for damage or lubricant issues.
Lists safety precautions applicable to all procedures within the Rear Axle group.
