IMPORTANT: After performing all operations in this
table, perform all daily and weekly maintenance op-
erations listed in the "Pretrip Inspection and Daily
Maintenance" chapter of the
Business Class Trucks
Driver’s Manual
. Also, perform all M1 Maintenance
Interval Operations at the Initial Maintenance (IM).
NOTE: Numbers in this table are maintenance opera-
tion reference numbers matching those in the text of
this manual. The Initial Maintenance consists of all
M1 Operations plus the other operations listed below.
Initial Maintenance (IM) Operations
Maint.
Oper. No.
Initial Maintenance (IM) Operations
00–10 Perform All M1 Operations
25–02 Clutch (Pull-Type) Inspecting and Adjusting
26–02 Eaton Fuller and Meritor Transmission Oil Changing and Magnetic Plug
Cleaning
26–08 Aisin Transmission Fluid and Filter Changing and Magnetic Plug Cleaning
31–01 Frame Fastener Torque Checking
32–03 U-Bolt Torque Checking
33–04 All-Axle Alignment Checking
35–03 Axle Lubricant Changing and Magnetic Plug Cleaning
35–04 Two-Speed-Axle Shift Unit Oil Level Checking
General Information00
Initial Maintenance (IM) Operations Table: 00–09
Business Class Trucks Maintenance Manual, February 200400/16
To Next Page
Loading...
