bag length from bag roll. Make sure to cut in a straight line. Plug in the power cord.
2. Open lid. Place one end of cut bag onto sealing strip, don’t worry if you accidently place any material onto the
gasket area.
3. Close the lid firmly by touching down firmly on both sides, check to make sure that the lid will not open. If you
hear a "click" on each side, then you have successfully locked the lid in place.
NOTE: The sealing strip will NOT work properly unless you lock the lid. Make sure that the lid has been locked on
both sides for proper sealing.
4. Now that the lid has been locked, touch the Seal Only button to create a custom sized bag. The indicator light
illuminates during the seal process.
5. Once completed the indicator light will turn off. Press the release buttons on both sides of the machine, it is
now safe to take out the newly created bag.
6. The custom sized bag is now ready for vacuum sealing.
CAUTION: Make sure you give the appliance time to cool down. Wait at least 20 seconds between seals. Under
very heavy usage, the appliance will shut off automatically to prevent overheating. If it does, wait 20 minutes to
allow appliance to cool off.
How to Vacuum Seal with the Vacuum Bags
1. Place the item(s) to be sealed into the pre-cut or custom sized bag. Leave at least 2 inches between the
contents and the top of the bag to allow for bag contraction.
2. Open the lid and place the open end of the bag down into the vacuum channel.
To Next Page
Loading...