Need help?Do you have a question about the FRIATEC FRIAMAT PRIME ECO and is the answer not in the manual?
General| Operating Frequency | 50-60 Hz |
|---|---|
| Welding Voltage | 8-48 V |
| Data Logging | Yes |
| Welding Process | Electrofusion |
| Protection Class | IP54 |
| Humidity | Up to 90% non-condensing |
Dangers to user/equipment and explanation of warning symbols.
Precautions for cables, maintenance, and correct voltage.
Unit design and automatic operation via barcodes.
Key specifications like voltage, frequency, output, weight.
Handling, setup instructions, and general operation advice.
Cable prep, contact cleaning, and fitting preparation.
Using the reader wand and handling barcodes.
Steps for starting fusion, safety distances, and cancellation.
Explanation of MENU, START, STOP, and Arrow buttons.
Accessing and using submenus for Time, Date, Language, Volume.
Explanation of MENU, START, STOP, and Arrow buttons.
Diagram of menu structure for ID-Data, Basic setting, Fusion process, etc.
Accessing and configuring submenus: Documentation, Time, Date, Language, Volume.
Switching documentation on/off for saving parameters.
Activation and purpose of this menu.
Entering and managing commission numbers.
Using operator passes for data saving and security.
Enabling and using traceability barcodes.
Activation and purpose of the Data menu.
Transferring data to external devices.
Deleting data from the unit.
Viewing device information like date/time, voltage, temperature.
Manual barcode entry for fusion.
Formatting memory sticks for data transfer.
Configuration options for fusion processes.
Option for entering commission number, operator pass, etc.
Entering traceability, pipe number, and pipe length data.
Adding various text fields for fusion data.
Annual maintenance and user tasks.
Troubleshooting barcode reading errors.
Overheating protection and cool down message.
General advice on error messages and contacting service.
List of recommended accessories.
Contact info for service stations.
To Next Page
