Need help?Do you have a question about the FRIATEC FRIAMAT E and is the answer not in the manual?
Details potential hazards to operator, model, and operation from incorrect use or misuse of the fusion units.
Provides detailed specifications for FRIAMAT® models including input voltage, frequency, power, and dimensions.
Explains the function, colour, and operation of the six control buttons: START, STOP, INFO, SET, MENU, RES.
Explains automatic power regulation, ambient temperature-based fusion time, and the need for bar codes.
Instructs to unroll cables completely and ensure clean contact surfaces to prevent overheating and charring.
Provides detailed instructions for correctly reading bar codes with the wand, including handling damaged labels.
Outlines steps to initiate, monitor, and complete the fusion process, emphasizing safety distances and parameter recording.
Explains how to view voltage/frequency and warns about operating outside the recommended input voltage range.
Details printing the entire report memory or deleting all data, with warnings about irretrievable data loss.
Discusses issues with bar code reading, suggesting checks for dirt/damage and the use of Emergency Input Mode.
Guides on using the Emergency Input Mode to manually enter bar code data when standard reading fails.
Explains overheat prevention via temperature monitor, which displays a cooling message if needed.
Details fault messages, their causes/remedies, and warning messages for operation and maintenance issues.
General| Brand | FRIATEC |
|---|---|
| Model | FRIAMAT E |
| Category | Welding System |
| Language | English |
To Next Page
