5
1.3 Use in accordance with the requirements
The fusion units of the FRIAMAT
®
Family are exclusively for use in the fusion
of
- FRIALEN Safety Fittings with HD-PE pressure pipes (SDR 17-7)
and
- FRIAFIT Sewage Fittings with HD-PE sewage pipes (SDR 17 - 32)
Your FRIAMAT
®
model can also be used with fittings from other manufacturers
as long as they have been provided by the manufacturer with a bar code 2/5
interleaved to ANSI HM 10.8 M - 1983 or ISO CD 13950/08.94.
Using in according with the requirements also includes observing
- all the directions in this Operating Instruction and also
- the guidelines from the DVGW Code of Practice, from the DVS, the UVV
and the appropriate national and local regulations.
IMPORTANT ! Any other usage does not comply with the requirements !
FRIATEC AG accepts no liability for use which does not comply with the
requirements:
- Modifications or alterations are not permitted for safety reasons
- The fusion units of the FRIAMAT
®
Family must only be opened by an
electrical specialist
- Fusion with fusion units of the FRIAMAT
®
Family whose lead seals are
broken will render all claims for warranty and liability null and void.
Other examples of uses which contravene the requirements:
- use as a battery charger
- use as a power supply for heaters of any type
To Next Page
Loading...
