Need help?Do you have a question about the FRIATEC FRIAMAT BASIC ECO and is the answer not in the manual?
Discusses potential hazards associated with FRIAMAT® fusion units and their operation.
Provides essential guidance and recommendations for safe operation and handling of the equipment.
Lists potential hazards and risks encountered during operation or maintenance.
Details specific risks related to electrical hazards and proper precautions.
Outlines crucial safety measures to be observed when operating units in various site conditions.
Explains the fundamental mechanism and process by which the FRIAMAT® units function.
Lists detailed specifications, performance parameters, and technical characteristics of the units.
Outlines the necessary steps and checks before commencing a fusion process.
Explains the procedure for reading and inputting barcode information for fusion.
Details the steps involved in initiating and executing a fusion cycle.
Identifies and explains the purpose of each button on the FRIAMAT® prime eco control panel.
Details settings related to the fusion process, including commission numbers and operator passes.
Describes how to transfer fusion data to external devices like PCs or memory sticks.
Outlines the recommended schedule and procedures for unit maintenance.
Troubleshooting steps for issues encountered with barcode reading.
Addresses problems encountered during the fusion process and how to resolve them.
General guidance on interpreting and acting upon system messages.
Details specific error codes, their significance, and recommended solutions.
Lists and explains various warning messages and informational alerts from the unit.
General| Operating Voltage | 230 V |
|---|---|
| Operating Frequency | 50/60 Hz |
| Welding Cable | 4 m |
| Protection Class | I |
| Degree of Protection | IP54 |
| Ambient Temperature | -10°C to +45°C |
| Welding Voltage Range | 8 V - 48 V |
| Power Supply | 230 V |
To Next Page
