29
5.8 Menu “Formatting”
Basically the FRIATEC Memory-Stick can be used
for the transfer of data. The FRIATEC Memory-Stick
can be purchased from FRIATEC.
If you have not used the FRIATEC Memory-Stick on
the FRIAMAT
®
prime eco and the correct format has
therefore not been set, or you decide to go for a
standard USB memory-stick, please note that it
must be formatted to FAT 12 or FAT 16. A USB
memory-stick formatted to FAT 32 or a partitioned
USB memory-stick (Master Boot Record) will
produce the error message „ERROR 91“ on your
FRIAMAT
®
.
Formatting to FAT 12 or FAT 16 can be done in sub-
menu „Formatting“. Press the MENU button to
access the main menu. Use the arrow buttons
(up/down) to access submenu „Formatting“ and
select by pressing the START button. On selecting
menu point „MEMORY-STICK“ you will be asked
„ARE YOU SURE?“ before formatting starts.
IMPOR
TANT!
Please note that all data is deleted from the
memory-stick during formatting!
IMPOR
TANT!
FRIATEC accepts no liability for the use of
standard USB memory-sticks. Please use the
FRIATEC Memory-Stick.
5.9 Fusion Options
5.9.1 ID Data
IMPOR
TANT!
The “ID-Data” option is activated and visible to
you only once documentation or traceability has
been switched on.
FT_2377e_II_07_GB.qxd 13.02.2007 12:31 Uhr Seite 29
To Next Page
Loading...
