18
IMPOR
TANT!
The language setting menu displays two aste-
risks right and left in the top line. These serve to
identify the language setting menu if the langua-
ge has been accidentally changed.
4.4 Menu “Info”
Pressing the MENU button will take you to the main
menu. Use the arrow buttons to take you to the sub-
menu “Info” and select this by pressing the START
button. The submenu “Info” is divided into the fol-
lowing individual menus:
• date/time
• voltage/frequency
• temperature (ambient temperature)
• device number
• software version
• maintenance date
Use the arrow buttons to select the required indivi-
dual menu and select this using the START button.
Within this individual menu you can access the
information you requested and leave each menu by
pressing either the START or the STOP button.
4.5 Menu “Emergency input”
By pressing the MENU button you will access
the main menu. From there find the submenu
“Emergency input” using the arrow buttons and
select it by pressing the START button.
Now “Code:” is displayed and 24 digits with the first
one flashing (when accessing this for the first time
all the digits will be set to “0”, afterwards the most
recently manually entered barcode is displayed).
Enter the digits displayed on the barcode of the
fitting to be fused. Once the digits have been
entered using the arrow buttons, you must confirm
this by pressing the START button; if you press the
STOP button the process will be stopped (without
saving data).
FT_2377e_II_07_GB.qxd 13.02.2007 12:31 Uhr Seite 18
To Next Page
Loading...
