EasyManua.ls Logo

FRIATEC FRIAMAT BASIC ECO - Setting Up and Connecting; Operating

Default Icon
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
2.4 Transport/storage/dispatch
Your FRIAMAT
®
-model is delivered in an aluminium
transport box. Unpacking requires no specific skills,
nor does storage in the transport box. The tempe-
rature range during storage is -20°C.....+70°C.
W
ARNING!
Always transport/store inside aluminium trans-
port box.
2.5 Setting up/connecting
Your FRIAMAT
®
-model can be set up and operated
outdoors if protected from rain and wet.
- Set up your FRIAMAT
®
-model on level ground
(preferably horizontal).
- Ensure that generator is fused with a 16 A mini-
mum (slow acting) fuse.
- Plug unit connection cable into power socket.
- Use extension cable if necessary, ensure suffi-
cient cross section (see also Section 2.3).
- Observe operating instructions of generator if
used.
W
ARNING!
Always roll out all cables before use!
2.6 Operating
W
ARNING!
Charring! Dirty contacts may char the plug.
Contact surfaces of fitting and fusion plug must be
clean at all times:
FT_2377e_II_07_GB.qxd 13.02.2007 12:31 Uhr Seite 12

Related product manuals