EasyManua.ls Logo

Fridgemaster MC55264DS - Installing Your New Appliance

Fridgemaster MC55264DS
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
In order to improve
efficiency of the cooling system and
save energy, it is necessary to maintain
good ventilation around the appliance. For
this reason, sufficient clear space should
be available around the refrigerator.
It is advisable for there to be at least
(50~70)mm of space from the back to the
wall, at least 100mm from its top,at last
100mm from its side to the wall and a
clear space in front to allow the doors to
open 135°. Please see the following
diagrams.
Installing your new appliance
Ventilation of appliance
Before using the appliance for the first
time, you should review the following tips.
Note:
This appliance performs well within the
climate class from SN to T showed in the
table below.
It may not work properly if left at a
temperature above or below the indicated
range for a long period.
Climate class
Ambient temperature
SN
N
ST
T
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
Stand your appliance in a dry place to
avoid moisture damage.
Keep the appliance out of direct sunlight,
rain or frost. Stand the appliance away
from heat sources such as stoves, fires or
heaters.
1800
966
100
100
653~673
1130~1150
For sufficient leveling and air circulating in
the lower rear section of the appliance,
the bottom feet may need to be adjusted.
You can adjust them manually using a
suitable spanner.
To allow the doors to self-close, tilt the top
backwards by about 10mm.
Leveling of appliance
10mm
7
5
0~
7
0

Related product manuals