Friedrich CP24G30A User Manual

2.3.6 SYNCHRONOUS MOTOR
1. Remove the control box. (Refer to section 3)
2. Unfold the control box. (Refer to section 10)
3. Remove the crankshaft.
4. Disconnect all the leads of the synchronous motor.
5. Remove the 2 screws which fasten the synchronous
motor. (See Fig. 30)
6. Re-install the components by referring to the removal
procedure, above.
—9—
Figure 30

Friedrich CP24G30A Specifications

General

Brand	Friedrich
Model	CP24G30A
Category	Air Conditioner
Language	English