10
Clean and maintenance
Clean lter
1
2
3
4
Clean lter
Install lter
Open panel
Open panel to access filter.
Remove lter
Remove the filter as
indicated in the fig.
● Use vacuum or water to
clean the filter.
●
When the filter is very dirty, use
warm water (below 113°F) to
clean it, and then allow to dry.
Install the filter and then close the
panel cover tightly.
Note:
■ The filter should be cleaned every three months. If environment is
excessively dusty more frequent cleaning may be required.
■ After removing the filte , do not touch fins to avoid injur .
■
Air dry the filter to avoid deformation or fire hazard.
To Next Page
