To Next PageTo Next Page
Need help?Do you have a question about the Friedrich MW24Y3H and is the answer not in the manual?
General| Brand | Friedrich |
|---|---|
| Model | MW24Y3H |
| Category | Air Conditioner |
| Language | English |
Detailed electrical characteristics including capacity, power, current, and efficiency for indoor and outdoor units.
Specifications for fan motor speed and power source for indoor and outdoor units.
Noise levels (dB) for indoor and outdoor units during cooling and heating operations.
Details on compressor type, weight, refrigerant type, and charge for the system.
Shipping and net weight specifications for indoor and outdoor units.
Physical dimensions, pipe diameters, and unit measurements for the indoor unit.
Physical dimensions and measurements for the outdoor unit.
Details on serial signal errors, including reverse and forward signal issues during startup and operation.
Errors related to indoor unit thermistor circuits, indicating open or short conditions.
Errors related to outdoor unit thermistor circuits, including open/short and temperature variations.
Control errors for the indoor unit, such as relay welding, power interruption, and protection mechanisms.
Control errors for the outdoor unit, covering trip errors, CT abnormalities, and fan drive system issues.
Errors associated with the refrigerant cycle, such as abnormal temperatures or pressure switch issues.
Errors related to optional functions, including filter voltage and PFC circuit issues.
Error indication for model information display during startup.
Components related to the front panel, including the main assembly and individual panels.
Parts for air intake, including grille assembly and replaceable air filters.
Components for securing parts and providing visibility, such as clamper grilles and receiver windows.
Accessories for remote operation, including the remote control unit and its holder.
Various casing parts and covers for the indoor unit's structure and protection.
Components for water drainage and structural mounting, like drain hoses and pillars.
Airflow control elements such as louvers and diffusers for directing air within the room.
Parts related to the fan assembly and protective guards for the indoor unit.
Components related to the evaporator assembly and its supporting brackets.
Parts for air filtration and the main crossflow fan assembly.
Component for mounting the room thermistor, ensuring accurate temperature readings.
Main controller PCBs and associated control box and cover for unit management.
Various motors (DC brushless, step) and terminal connectors used in the indoor unit.
Indicator PCB assembly and pipe thermistor for system monitoring and feedback.
Main top and front panel assemblies for the outdoor unit's housing.
Panels providing access for servicing and covering the side of the outdoor unit.
Miscellaneous parts like valve covers, protective nets, and drainage components.
Base assembly and separate wall sub-assembly for mounting the outdoor unit.
The condenser unit and its associated fan motor and propeller fan assembly.
Bracket for mounting the fan motor and the valve plate component.
Various valves (3-way, 4-way) and strainers essential for refrigerant flow control.
The main compressor, accumulator, and their support structures for the refrigeration cycle.
Solenoid, pressure switch, expansion valve, and muffler for system regulation and operation.
Various PCB assemblies (Inverter, Capacitor, Transistor) and their associated cases.
Power supply PCB assembly and ACTPM component for managing electrical functions.
Thermistors for monitoring conditions and choke coils for electrical filtering.
Items for installation and operation, including wall brackets, remote controls, and holders.
Consumable items like batteries, tape, screws, and air cleaning filters.
Parts for refrigerant piping and water drainage, such as drain pipes and caps.
