THRU-THE-WALL MODELS
WallMaster
®
Uni-Fit
®
OVERVIEW
Sleeve size
Fits 27” sleeves Fits sleeves from
24 1/2” to 27”
Applications
RESIDENTIAL OR
LIGHT COMMERCIAL
RESIDENTIAL OR
LIGHT COMMERCIAL
COMFORT & CONVENIENCE
Perfect t for Fedder’s 27” sleeves Y —
Top-mounted controls Y —
Electronic controls Y Y
Programmable timer 24 hr. 24 hr.
Remote control Y Y
Auto-restart when power is
interrupted
Y Y
Smart Fan auto adjusting fan Y —
Upward angled air discharge Y —
Air ow direction control 4-way 6-way
Fan speeds 3 3
SOUND REDUCTION
TECHNOLOGY
Steel inner wall and extra dense
insulation
Y Steel inner wall
Vibration-isolating design and
components
Y Y
Superior airflow design Y —
EARTH
FRIENDLY
ENERGY STAR
®
models Y Y
Environmentally friendly R-410A Y Y
Energy saver switch Y Y
HEALTH
Washable, antimicrobial air lter Y Y
Stale air exhaust — Y
SAFETY
EntryGard
™
anti-intrusion
protection
Y —
Insect barrier Y —
INSTALLATION
Slideout chassis Y Y
Power cord direction Left Right
Concealed power cord option Y —
Internal drain kit option Y —
Bafe adapter kit (for installation in
Fedders ‘B’ sleeves)
Y —
Condensate drain kit Y —
A solid-side wall sleeve allows for
installation in thick exterior walls where the
installation of room air units with side vents
would affect performance and may even void
the warranty.
WHEN SHOULD YOU INSTALL
A SOLID SIDE SLEEVE?
FRIEDRICH THRU-THE-WALL
Solid-side sleeve (no side vents) can
be installed in thicker walls. Sleeve
can be positioned ush with exterior
wall.
ROOM AIR CONDITIONER
Blocked side vents restrict air ow.
Or with minimum intrusion into the
room.
WallMaster
®
. A perfect fit in Friedrich and competitor’s
27” sleeves.
Commercial grade quality unit is ideal for installation in new
construction, retrots and remodels.
THRU-THE-WALL AIR CONDITIONERS
NOTE: Chassis requires WSE sleeve for new installations (sold and shipped separately)
WallMaster
®
8000-15600 Btu
Up to 10.4 EER
WallMaster
®
Electric Heat
COOLING
9800-15600 Btu
Up to 9.8 EER
ELECTRIC HEAT
9100-11000 Btu
WallMaster
®
Heat Pump
COOLING
9000-12000 Btu
Up to 9.8 EER
HEATING
7500-9350 Btu
Up to 2.6 COP
COOL & HEAT
COOL
Perfect t in 27"
wall sleeves,
including Fedders A
and B* sleeves.
Fits Fedders A & B sleeves. *B sleeve installations require BAK accessory, bafe adapter kit.
WSE wall sleeve ships
with weather panels
and grille.
Sleeve is shown at right with
standard galvanized steel
inner panel, painted steel
outer panel and standard
grille
Inner steel weather panel WSE sleeve Outer weather panel Standard grille
Select MODE, FAN SPEED,
MONEY SAVER
®
, adjust
TEMPERATURE and set the
TIMER.
FITS SLEEVES
16 3/4" HIGH X 27" WIDE
2
3
To Next Page
Loading...
Need help?
General
