Friedrich WALLMASTER User Manual

WALLMASTER
®
FEATURES
Chassis requires WSE sleeve (sold and shipped separately)
*Installation in Fedders B sleeve requires a bafe kit. See BAK accessory under accessories.
Durability & Quality
• Rotary compressors provide quiet,
dependable performance
• Premium aluminum exterior grille
• Dense blower insulation
• Ried copper tubing
• Impact resistant front cover
• High tech ns with sine wave lanced
louvers increase energy efciency
by increasing surface area for heat
exchange
Comfort & Convenience
• Easy-to-reach, top mount controls
• Remote control
• 24-hour timer
• Smart Fan auto-adjusts fan speed to
maintain desired temperature
• Check lter reminder
• 3-speed fan
• Auto restart
• Electronic defrost control
• Reversible louver allows a second
airow option
Energy Management
• Money Saver® setting saves money
by operating the fan only when
needed
• ENERGY STAR
®
qualied models
• R-410A refrigerant
Health and IAQ
• Washable, antimicrobial lter
Sleeve Dimensions
Friedrich
WSE Sleeve
Fedders
A Sleeve
Fedders
B Sleeve*
Height (inches) 16 3/4 16 3/4 16 3/4
Width (inches) 27 27 27
Depth (inches) 16 3/4 16 3/4 19 3/4
Ried copper
tubing
Sine wave
lanced louvers
Installation Features
• Mounts ush with the exterior wall
for a neat appearance
• Ideal for thicker wall installations,
where side ns don’t t
• Reversible louver allows for a second
airow option
• A high efciency replacement for 27”
sleeves including Fedders A and B*.
Sleeve measures 27” W x 16 3/4” H
Accessories
• WSE sleeve, ships with inside and
outside weather panel and standard
grille
• AG architectural grille for use with
WSE sleeve
• Bafe adapter kit for use with deep
sleeve installations
• Drain kit for condensate disposal
• Internal drain kit for new
construction applications where
condensate drain system is built-in
Angled air discharge for superior air
distribution when the unit is installed
low on a wall. Reversible louver for a
second air ow option.
Safety & Security
• EntryGard
™
anti-intrusion protection
secures chassis to sleeve to deter ‘kick-
in’ intrusion
• Power cord current leakage protected
• Insect barrier
WallMaster
®
fits existing Fedders sleeves.
Uni-Fit
®
8000-13000 Btu
Up to 9.8 EER
Uni-Fit
®
Electric Heat
COOLING
8000-11500 Btu
Up to 9.6 EER
ELECTRIC HEAT
3850-11200 Btu
Uni-Fit
®
Universal fit for easy replacement in existing 24 1/2˝,
26” or 27” sleeves.
Residential grade quality for installation in new construction,
retrots and remodels.
NOTE: Chassis requires USC sleeve for new installations (sold and shipped separately)
THRU-THE-WALL AIR CONDITIONERS
COOL & HEAT
COOL
Select MODE, FAN SPEED,
MONEY SAVER
®
, adjust
TEMPERATURE and set the
TIMER.
FITS SLEEVES
24 1/2", 26" AND 27" WIDE
Sleeve can be installed ush with
the exterior wall. Optional AG
architectural grille shown.
USC wall sleeve ships
with weather panels
and grille.
Sleeve is shown at right with
standard painted steel inner
panel, painted steel outer
panel and standard grille
Inner weather panel USC sleeve Outer weather panel Standard grille
4
5

Friedrich WALLMASTER Specifications

General

Refrigerant	R-410A
Control Type	Remote control
Filter Type	Washable air filter
Fan Speeds	3
Noise Level	50 - 55 dB