To Next PageTo Next PageWhat to do if my Friedrich ZoneAire Compact P08SA Air Conditioner shows error E4?
If your Friedrich Air Conditioner displays the error code E4, it means the water plate is full. To resolve this, pull out the rubber stopper located at the bottom of the unit to drain the water.
What does error E1 mean on my Friedrich Air Conditioner?
Error code E1 on your Friedrich Air Conditioner indicates an electrical short on both the temperature sensor and the PCB. It is recommended to contact an electrician for repair.
What does error E2 mean on my Friedrich ZoneAire Compact P08SA Air Conditioner?
Error code E2 on your Friedrich Air Conditioner indicates an electrical short of the temperature sensor copper tube and PCB wiring. It is recommended to contact an electrician for repair.
General| Cooling Capacity | 8, 000 BTU |
|---|---|
| Coverage Area | Up to 350 sq. ft. |
| Fan Speeds | 3 |
| Operating Voltage | 115V |
| Operating Frequency | 60 Hz |
| Refrigerant | R-410A |
| Control Type | Electronic |
Explains the function of the Power, Mode, Timer, and Sleep keys.
Details mode selection (Cooling, Heating, Dehumidifying) and temperature adjustment.
Instructions for setting the auto-off/on timer function.
Table listing error codes (E1, E2, E4), their causes, and troubleshooting steps.
