To Next PageTo Next PageWhat to do if my Friedrich ZoneAire Compact P10SA shows error E4?
If your Friedrich Air Conditioner displays the error code E4, it means the water plate is full. To resolve this, pull out the rubber stopper located at the bottom of the unit to drain the water.
What does error E1 mean on my Friedrich ZoneAire Compact P10SA Air Conditioner?
Error code E1 on your Friedrich Air Conditioner indicates an electrical short on both the temperature sensor and the PCB. It is recommended to contact an electrician for repair.
What does error E2 mean on my Friedrich Air Conditioner?
Error code E2 on your Friedrich Air Conditioner indicates an electrical short of the temperature sensor copper tube and PCB wiring. It is recommended to contact an electrician for repair.
General| Brand | Friedrich |
|---|---|
| Model | ZoneAire Compact P10SA |
| Category | Air Conditioner |
| Language | English |
Details electrical shock hazards and safe handling of the refrigeration system under high pressure.
Provides crucial advice on unit operation, including ambient temperature limits and restart delays.
Explains the functions of the POWER, MODE, TIMER, and SLEEP keys on the control panel.
Explains the functions of various keys on the remote control, including mode selection and temperature adjustment.
Describes how to use the timer functions for turning the unit ON or OFF automatically.
Provides instructions for cleaning the air filter and the condenser/evaporator using a vacuum cleaner.
Lists common error codes (E1, E2, E4) and provides troubleshooting steps, including contacting an electrician or draining water.
