Welcome
Page 2
FriendlyRobotics
Welcome…
To the world of robotic lawn mowing with the Friendly Robotics Robomower. Thank you
for purchasing our product. We know that you will enjoy the extra free time you will have while
using Robomower to mow your lawn. When installed and used properly, Robomower will
operate safely on your lawn and provide you with a quality of cut matched by few mowers of any
kind. You will be impressed with your lawns’ appearance and best of all Robomower did it for
you.
IMPORTANT!
The following pages contain important safety and operating instructions. Please
read and follow all instructions in this manual. Carefully read and review all
safety instructions, warnings and cautions contained in this manual. Failure to
read and follow these instructions, warnings and cautionary statements may
result in severe injury or death to persons and pets or damage to personal
property.
A Basic How It Works
A small wire, called the perimeter wire, is placed around the perimeter of the lawn and any other areas
where you do not want the mower to enter. A small signal is generated from a device attached to the
perimeter wire, called the Perimeter Switch. When turned on, this signal is carried through the perimeter
wire, creating what we define as a virtual wall. The virtual wall is visible only to the Robomower, keeping
the Robomower where you want it, on your lawn. The perimeter switch must be turned on to activate the
perimeter wire before the Robomower will operate.
Perimeter switch turned
on to generate signal
Virtual wall, visible
only to the
Robomower.
To Next Page
Loading...
