Friendly Robotics robomower RL350 - User Manual

Robomower
®
Service Guide
 Read carefully and thoroughly all relevant sections before servicing Robomower.
 It is very important to read and follow all warning and safety instructions in this
manual and in the Robomower Operating Manual.
 All maintenance procedures and troubleshooting must be carried out exactly as
given in this manual.
All rights reserved. No part of this book may be reproduced or used in any form
or by any means – graphic, electronic or mechanical, including photocopying,
recording, taping or by any electronic information storage and retrieval systems
without a prior written consent of F. Robotics Acquisitions Ltd.
This book was carefully prepared. However, F. Robotics Acquisitions Ltd. will
not bear any responsibility for any errors, mistakes or misunderstandings. F. Robotics
Acquisitions Ltd. shall not bear responsibility for any damage resulting from faulty
instructions in this manual.
F. Robotics Acquisitions Ltd. reserves the right to introduce changes in the
product and/or to this manual without any prior notice.
© 2006. All rights reserved to F. Robotics Acquisitions Ltd.
I

Summary

1. Robomow Layout & Spare Parts

1.1 Robomow Layout and Main Components

Details Robomow's top, bottom, and internal views with part identification.

1.6 Comprehensive Spare Parts List

2. Menu Items

1.0 User Preferences

Allows user to set parameters specific to each zone, such as work time and edge settings.

2.0 Information Menu

3.0 Docking Options (RL1000 Only)

6.0 Service Menu Access

3. Troubleshooting

3.1 Robomow Error Messages

Lists all error messages, their causes, and corrective actions.

3.2 Problem Analysis Flowcharts

3.2.1 Setup Problems

Addresses issues related to perimeter switch and wire setup, including troubleshooting steps.

3.2.2 Power & Charging Problems

Details common issues with power supply, charging, and battery status.

3.2.3 Mowing Problems

Covers problems related to mowing motors, deck blockages, and mulching quality.

3.2.4 Edge Problems

Addresses issues where the Robomow fails to complete the edge or is not centered.

3.2.5 Automatic Mowing Problems

Troubleshoots problems with mowing patterns, area coverage, and navigation.

3.2.6 Manual Controller Problems

Details issues with unresponsive buttons or incorrect display on the manual controller.

3.2.7 Drive Problems

Covers problems related to drive motors, overload conditions, and wheel movement.

3.2.8 Front Wheel Problems

Addresses issues concerning the front wheel's rotation, position, and noise.

3.2.9 Bumpers Problems

Details problems with bumper activation, distortion, and sensor response.

3.2.10 Wire Sensors Problems

Covers issues related to 'No wire signal' and 'Move from wire' messages.

3.2.11 Charging Station Problems

Addresses issues with docking, charging, and station contact detection.

4. Repair and Maintenance Procedures

4.1 Robomow External Procedures

4.2 Robomow Internal Procedures

5. Diagnostics

5.1 General Test Procedure

Outlines the basic test for service repair, ensuring system functionality and safety.

5.3 Calibration Procedures Guide

5.4 Tests Procedures

5.6 Diagnostic Fault Code Reference

5.7 Last Stop Cause Analysis

Friendly Robotics robomower RL350 Specifications

General

Brand	Friendly Robotics
Model	robomower RL350
Category	Lawn Mower
Language	English