Friendly Robotics robomower RL800 - User Manual

Robomower
®
Service Guide
 Read carefully and thoroughly all relevant sections before servicing Robomower.
 It is very important to read and follow all warning and safety instructions in this
manual and in the Robomower Operating Manual.
 All maintenance procedures and troubleshooting must be carried out exactly as
given in this manual.
All rights reserved. No part of this book may be reproduced or used in any form
or by any means – graphic, electronic or mechanical, including photocopying,
recording, taping or by any electronic information storage and retrieval systems
without a prior written consent of F. Robotics Acquisitions Ltd.
This book was carefully prepared. However, F. Robotics Acquisitions Ltd. will
not bear any responsibility for any errors, mistakes or misunderstandings. F. Robotics
Acquisitions Ltd. shall not bear responsibility for any damage resulting from faulty
instructions in this manual.
F. Robotics Acquisitions Ltd. reserves the right to introduce changes in the
product and/or to this manual without any prior notice.
© 2006. All rights reserved to F. Robotics Acquisitions Ltd.
I

Summary

1. Robomow Layout & Spare Parts

1.1 Robomow layout and main components

Describes the layout and main components of the Robomower.

3. Troubleshooting

3.1 Error Messages

Comprehensive list of error messages, their causes, and corrective actions.

3.2 Problem analysis flow charts

Guides to systematically analyze and resolve problems using flowcharts.

4. Repair and Maintenance Procedures

4.1 Robomow External procedures

Covers procedures for external maintenance and part replacements.

4.1.1 Fuses replacement

Instructions for replacing the power pack and charging fuses.

4.2 Robomow Internal procedures

Details internal maintenance and part replacement procedures.

4.2.1 Removing the cover

Step-by-step instructions for safely removing the Robomower's cover.

4.2.2 Returning the cover

4.2.3 Main Board Replacement

Procedure for replacing the main board, including flash replacement.

4.2.5 Mowing Motor Replacement

4.2.7 Wire Sensors replacement

5. Diagnostics

5.1 General test

A basic test performed after service to ensure proper operation and safety.

5.3 Calibration Procedures

5.3.1 Learn wire sensors

5.3.2 Edge Calibration

5.3.4 DK Calibration

5.4 Tests Procedures

5.4.1 Wire Sensors

5.4.4 Drive Motor

5.4.5 Mowing Motor

5.6 Diagnostics Fault Codes

Lists fault codes for drive motors, their meanings, and possible causes.

5.6.1 Drive Motors Problems

Details fault codes related to drive motor issues, including disconnection and friction.

5.6.2 Mowing Motors Problems

Lists fault codes for mowing motors, indicating current issues and power unit faults.

5.6.3 Wire Sensors Problems

Details fault codes for wire sensors, indicating disconnection or noisy signals.

5.7 Last Stop Cause

6. Friendly Robotics Procedures and policies

6.2 Robomow Power Pack Charging Policy

6.2.2 Charging procedure

7. Service Bulletins

7.1 Main Board #RL0536-01

Friendly Robotics robomower RL800 Specifications

General

Brand	Friendly Robotics
Model	robomower RL800
Category	Lawn Mower
Language	English