Friendly Robotics Robomow RL 1000 - Page 57

57
Press ‘GO’
Docking options
Press GO
Scroll until ‘Entry Points’
is displayed
Time: Mo 11:55
Press GO
Entry Points
Press GO
Press ‘GO’
Set Entry Points
Pres GO to learn
Press ‘GO’
Manual Depart
Press GO
Press the down
Scroll arrow
Entry 1: Docking
Pres GO for next
Press ‘GO’ - Mower will
start to follow the perimeter
Entry 2 of 4
Pres GO to set
Follow the mower and
Press ‘GO’ at the point
you want to set
Entry 3 of 4
Pres GO to set
Press ‘GO’ for other points
or leave the mower to
complete the edge
11:28 Mo10:30E
Press GO
One of the followin
g
displays is appeared
when the mower is in the Docking Station
Press ‘GO’
Docking options
Press GO
Press ‘GO’
Docking options
Press GO
Scroll until ‘Entry Points’
is displayed
Weekly program
Press GO
Entry Points
Press GO
Press ‘GO’
Set Entry Points
Pres GO to learn
Press ‘GO’
Manual Depart
Press GO
Press the down
Scroll arrow
Entry 1: Docking
Pres GO for next
Press ‘GO’ - Mower will
start to follow the perimeter
Entry 2 of 4
Pres GO to set
Follow the mower and
Press ‘GO’ at the point
you want to set
Entry 3 of 4
Pres GO to set
Press ‘GO’ for other points
or leave the mower to
complete the edge
11:28 Mo10:30E
Press GO
11:28 Mo10:30E
Press GO
Press ‘GO’
Docking options
Press GO
Press ‘GO’
Docking options
Press GO
Scroll until ‘Entry Points’
is displayed
Time: Mo 11:55
Press GO
Entry Points
Press GO
Press ‘GO’
Set Entry Points
Pres GO to learn
Press ‘GO’
Manual Depart
Press GO
Press the down
Scroll arrow
Entry 1: Docking
Pres GO for next
Press ‘GO’ - Mower will
start to follow the perimeter
Entry 2 of 4
Pres GO to set
Follow the mower and
Press ‘GO’ at the point
you want to set
Entry 3 of 4
Pres GO to set
Press ‘GO’ for other points
or leave the mower to
complete the edge
11:28 Mo10:30E
Press GO
11:28 Mo10:30E
Press GO
One of the followin
g
displays is appeared
when the mower is in the Docking Station
Press ‘GO’
Docking options
Press GO
Press ‘GO’
Docking options
Press GO
Scroll until ‘Entry Points’
is displayed
Weekly program
Press GO
Entry Points
Press GO
Press ‘GO’
Set Entry Points
Pres GO to learn
Press ‘GO’
Manual Depart
Press GO
Press the down
Scroll arrow
Entry 1: Docking
Pres GO for next
Press ‘GO’ - Mower will
start to follow the perimeter
Entry 2 of 4
Pres GO to set
Follow the mower and
Press ‘GO’ at the point
you want to set
Entry 3 of 4
Pres GO to set
Press ‘GO’ for other points
or leave the mower to
complete the edge
11:28 Mo10:30E
Press GO
11:28 Mo10:30E
Press GO

Back to default
Selecting ‘Back to default’ restores the factory default entry points – there is no distance in the
memory and the mower should complete the lawn’s edge at least once before it will use the default of
30% and 60% percentages of the perimeter as entry points.
To set this option follow the steps appeared in Figure 6.10.
 Entry Points - on/off
Allows user not to use the entry points. When setting the ‘Entry points’ to ‘off’ the mower will always
start the mowing of the inner area from the Docking Station.
To set this option follow the steps described in figures 6.10.
6.4.2 Auto Depart
Allows user to shut off the weekly program when setting the ‘Auto depart’ to ‘off’.
Figure 6.10
Setting Entry Points