INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
For existing 29" (73.7 cm) cutout wide opening,
you must call the Service Center for optional
thinner side panels. Also you must prepare the
countertop edge as shown in the "Countertop
Preparation" section (see page 8).
These surfaces should be flat &
leveled (hatched area).
1/2"
Shave Raised
Edge To Clear
Space for
31 5/16"
(81 cm)
Wide
Cooktop
30" Min.
I (76.2 cm) Min.
== •
18" Min.
Min. (45.7 cm) Mir
Locate Cabinet Doors 1" (2.5
cm) Min. From Cutout Opening
Grounded Junction Box or Wall Outlet Should Be
Located 8" to 17" (20.3 - 43.2 cm) From Right
Cabinet and 2" to 4" (5.1-10.2 cm) From Floor
IM PORTA NT:
Cabinet and
countertop width
should match the
cutout width.
E
E
Do not install the unit in the cabinet before reading next two pages.
_5 5/8" (90.5 cm) -
36 5/8" (93 cm)
30 '_
(76,2 cm)
3I 5/I6"
(79.5 cm)
28 5/16" (71,9 cm) 30±1/I6"
(76,2±0,15 cm)
2I 3/4 _ (55,2 cm) Min.
22 1/8" (56,2 cm) Max
24 " (61 cm) Min. with
backguard
36 518" (93 cm) Max.
35 5/8 r' (90.5 cm) Min.
Printed in United States
P/N 318201611 (0610)Rev. E
English - pages 1=12
EspafioF - p_ginas 13-24
Fran_ais - pages 25-36
To Next Page
Need help?
General
