To Next PageTo Next PageWhy does the “ADD WATER” light turn on my Frigidaire EFIC123-SS Ice Maker?
If the “ADD WATER” indicator light turns on for your Frigidaire Ice Maker, it means the water level is low or there is a lack of water. Add water, and the icemaker will resume operating automatically.
Why is my Frigidaire EFIC123-SS Ice Maker not making ice even though the cycle seems normal?
If the icemaking cycle seems normal but no ice is being produced by your Frigidaire Ice Maker, there could be refrigerant leakage or a blocked pipe in the cooling system. Consult a qualified technician or call Customer Service.
How to fix ice blockage in my Frigidaire Ice Maker?
If there is an ice blockage and no ice is being made in your Frigidaire Ice Maker, this may be because making ice is taking too much time. Turn off the machine and restart it after the ice block melts. You can also try changing the size selector to small ice cubes.
What to do if my Frigidaire Ice Maker does not operate?
If your Frigidaire Ice Maker isn't operating, ensure it's plugged into a standard 110/120 Volt, 60 Hertz power source. Also, the ambient or water temperature might be too high. Try running the icemaker in temperatures below 90°F and/or use colder water in the reservoir.
Why is the “Ice Full” light on my Frigidaire EFIC123-SS?
If the “Ice Full” indicator light is on for your Frigidaire Ice Maker, it means the ice basket is full. Remove ice from the storage basket to allow the unit to make more.
What to do if “Ice Full” and “Add Water” lights are on together on my Frigidaire Ice Maker?
If both “Ice Full” and “Add Water” lights are on simultaneously on your Frigidaire Ice Maker, this could indicate an electrical power surge, air in the lines, blocked lines, or the water tank's inability to detect water level. Try the following steps: 1. Turn off the icemaker and unplug it. 2. Fill it with water if needed. 3. Replace the plug and restart the unit. Inspect relative parts; remove the drain cap on the back of the unit and drain out a small amount of water. Replace the drain cap and attempt to use the unit again. Check if ice is blocking the ice pusher. Turn off the unit; let the ice melt and restart.
Why is there no display on my Frigidaire Ice Maker control panel?
If there is no indication on the control panel of your Frigidaire Ice Maker, check that the plug is properly plugged into the electrical outlet.
General| Finish | Stainless Steel |
|---|---|
| Ice Production | 26 lbs per day |
| Ice Shape | Bullet |
| Ice Storage Capacity | 1.5 lbs |
| Brand | Frigidaire |
| Model | EFIC123-SS |
| Category | Ice Maker |
| Color | Stainless Steel |
| Ice Cube Size | Small, Medium, Large |
| Water Supply | Manual Fill |
| Type | Portable Ice Maker |
Lists and identifies the main components of the ice maker.
Details the control panel layout and function of each button and indicator light.
Covers crucial steps for proper initial setup, including leveling and ventilation.
Step-by-step guide on how to operate the ice maker for ice production.
Explains the meaning of indicator lights and system notifications during operation.
Provides detailed steps for cleaning the ice maker's interior, exterior, and components.
