Frigidaire EFIC130-SS

Questions and Answers

T
Travis UnderwoodAug 7, 2025
How to fix Frigidaire EFIC130-SS Ice Maker when ice making cycle is normal but no ice formed?
- J
  Joseph MartinezAug 8, 2025
  If the ice making cycle seems normal, but no ice is being formed, it could be due to a few reasons: * The room or water temperature is too high. Ensure the room temperature is between 50°F and 105°F, and the water temperature is between 40°F and 90°F. * There may be a refrigerant leak in the cooling system or a blockage in the cooling system pipe. In these cases, you should have a qualified technician verify the issue.
K
Kimberly BallardAug 14, 2025
What to do if the ADD WATER light is on in my Frigidaire EFIC130-SS?
- L
  Laura ValdezAug 15, 2025
  If the 'ADD WATER' indicator light is on, it means the ice maker lacks water. Stop the ice maker, add water, and then press the “ON/ OFF” button again to restart the unit.
R
Raymond NelsonAug 22, 2025
Why is the ICE FULL indicator on my Frigidaire EFIC130-SS Ice Maker?
- R
  Robert HinesAug 22, 2025
  The ICE FULL indicator is on because the ice basket is full. Remove ice from the ice basket. If needed, you can continuously press the “Select” button for 5 seconds to allow the unit to make ice for 10 cycles, even when the “Ice” indicator is illuminated.
K
Kyle GonzalezAug 30, 2025
What to do if ice cubes stick together in my Frigidaire Ice Maker?
- H
  Hannah NelsonAug 30, 2025
  If ice cubes are sticking together, it could be due to: * The ice making cycle being too long: Stop the ice maker and restart it after the ice blocks melt. Also, select the small size ice cube option. * Water temperature in inner tank being too low: Replace the water with water that has a temperature between 40°F and 90°F.

Summary

Introduction

Installation Checklist

Checklist for proper installation of the ice maker, covering doors, leveling, power, and ice maker connections.

Important Safety Information

Safety Definitions

Explanation of safety alert symbols (DANGER, WARNING, CAUTION, IMPORTANT) used in the manual.

Child Safety Precautions

Instructions for safely handling packaging materials to prevent suffocation hazards for children.

Safety Instructions

Electrical Safety and Grounding

Guidelines for safe electrical connection, including grounding, outlet requirements, and extension cord usage.

Use Only Water

Important notice about using only water in the ice maker for safety, performance, and warranty.

Getting to Know Your Unit

Unit Components

Identification and description of the main parts of the ice maker, including the ice shovel, basket, and drain cap.

Control Panel Overview

Explanation of the control panel layout and the functions of its indicators and buttons.

Operating Procedures & Maintenance

Unpacking and Initial Setup

Steps for unpacking, cleaning, and correctly positioning the ice maker before operation.

Connecting Your Ice Maker

Instructions for safely connecting the ice maker to a grounded electrical outlet.

Cleaning and Maintaining Your Ice Maker

Detailed steps and materials needed for cleaning and descaling the ice maker.

Regular Maintenance and Storage

Recommendations for regular descaling and how to store the ice maker when not in use.

Using Your Ice Maker

Ice Making Operation

Step-by-step guide on how to operate the ice maker, including filling water, selecting size, and understanding indicators.

Troubleshooting Guide

Product Specifications

Limited Warranty

Frigidaire EFIC130-SS Specifications

General

Brand	Frigidaire
Model	EFIC130-SS
Color	Stainless Steel
Ice Production Capacity	26 lbs per day
Material	Stainless Steel
Ice Shape	Bullet
Control Type	Electronic
Water Supply	Manual Fill
Voltage	120V
Type	Ice Maker
Ice Storage Capacity	1.3 lbs
Ice Cube Size	Small
Water Reservoir Capacity	2.3 liters
Dimensions	9.5 x 13.2 x 14.4 inches
Power Consumption	120W