7OPERATING PROCEDURES & MAINTENANCE
DANGER
1. Remove the exterior and interior packaging. Check if ice basket and ice scoop
inside. If any parts are missing, please contact our customer service.
2. Remove the tapes for fixing ice shovel, ice basket & ice scoop. Clean the tank &
ice basket.
3. Put the ice maker on a level & flat counter top without direct sunlight and other
sources of heat (i.e.: stove, furnace, radiator). Maker sure that there is at least 4
inches gap between the back & LH/RH sides with the wall.
4. Allow one hour for the refrigerant fluid to settle before plugging the ice maker in.
5. The appliance must be positioned so that the plug is accessible.
WARNING: Fill with potable water only. Only use drinking water.
*Improper use of the grounded plug can result in the risk of electrical shock. If
the power cord is damaged please call our customer service.
1. This unit should be properly grounded for your safety. The power cord of this
appliance is equipped with a grounding plug which mates with standard grounding
wall outlets to minimize the possibility of electric shock.
2. Plug your appliance into an exclusive, properly installed, grounding wall outlet. Do
not be under any circumstances; damage the grounding means of the plug. Any
questions concerning power and or grounding should be directed toward a
certified electrician.
3. This appliance requires a standard 110-120Volt, 60Hz electrical outlet with good
grounding means.
How to clean your ice maker：
**Materials Needed:**
1. **Descaling solution:** You can purchase a commercial descaling solution
specifically designed for ice makers or use water.
2. **Warm water**
3. **Soft cloth or sponge**
4. **Gloves (optional)**
5. **Bucket or container (if needed)**
**Steps:**
1. **Empty the Ice Bin:**
Remove any ice from the ice bin and discard it. This ensures that you're working
with a clean surface.
2. **Mix the Descaling Solution:**
Follow the instructions on the descaling solution package ,or if using water, make
enough water in a container to cover the water lines and components.
3. **Pour the Solution into the Water Reservoir:**
Pour the descaling solution into the water reservoir of the ice maker.
UNPACKING YOUR ICE MAKER
CONNECTING YOUR ICE MAKER
CLEANING AND MAINTAINING YOUR ICE MAKER
EN
To Next Page
Loading...
